06 Sep '13, 7pm

3D Printering: Electronics Boards

3D Printering: Electronics Boards

If you’re gearing up to build a 3D printer, one of the first things you’ll need to look at is your options for electronics boards. Whether you decide to optimize for cost or capability, the choices you make during the planning stages of your build will drastically affect what the final project will look like and how it will behave. There are a ton of electronics boards out there, so for this installation of 3D Printering, we’re going to take a look at what’s available. Hit the link below to give Hackaday more pageviews read the rest. RAMPS, RUMBA, and RAMBo RAMPS, the RepRap Arduino Mega Pololu Shield, is the OG RepRap electronics board. The board itself is fairly basic – a few sockets for Pololu stepper motor drivers , a few MOSFETs for heaters and fans, and a few screw terminals to connect a power supply. Since this is a shield, all the intelligence for this board comes ...

Full article: http://hackaday.com/2013/09/06/3d-printering-electronics-...

Tweets

New post: 3D Printering: Key Patents

New post: 3D Printering: Key Patents

hackaday.com 11 Sep '13, 7pm

Carl Deckard got his initial patents for SLS while at UT-Austin, and I worked with him some when I was getting my degree t...

A better link for details on those LPC812 boards

nxp.com 09 Sep '13, 7am

Designed in partnership with mbed and developed by Embedded Artists, the LPC800-MAX extends the LPC simplicity challenge b...

Electronics supply chain fights the counterfeiters

Electronics supply chain fights the counterfeiters

electronicsweekly.com 05 Sep '13, 11pm

Electronics supply chain fights the counterfeiters no comment richard wilson 2013/09/06 Counterfeiting of electronic compo...

Q&A: Jack Ganssle, Electronics Entrepreneur

Q&A: Jack Ganssle, Electronics Entrepreneur

circuitcellar.com 06 Sep '13, 6pm

Jack Ganssle is a well-known engineer, author, lecturer, and consultant. After learning about oscilloscopes, transistors, ...

Transformer maker uses 3D printing #3Dprinting ...

electronicsweekly.com 09 Sep '13, 10am

Transformer maker uses 3D printing no comment richard wilson 2013/09/09 Resistive and inductive wound components manufactu...

Surfing in 3D: Printed Boards Make Waves in Cus...

designnews.com 02 Sep '13, 11am

As a surfer myself, I know that creating a custom-made surfboard is both a precise and creative science, as well as a pain...

Desktop scanner accelerates 3D model creation: #Atmel #MakerBot #3DPrinting @ElectronicDesign

Desktop scanner accelerates 3D model creation: ...

electronicdesign.com 07 Sep '13, 6pm

The MakerBot Digitizer Desktop 3D Scanner, developed by MakerBot, a subsidiary of Stratasys Ltd., takes a real-life object...

We've been featured in @New_Electronics ' #Elec...

newelectronics.co.uk 13 Sep '13, 11am

Catering specifically to their professional needs, the event attracted 1600 design engineers to the Ricoh Arena, Coventry....

3D Printed Prosthetic Hand

3D Printed Prosthetic Hand

hackaday.com 09 Sep '13, 11am

3D printing – with the promise of low-scale manufacturing and custom parts – is ideal for the prosthetic industry, but so ...

Here are a few alternative #plastics for your #RepRap, #Makerbot, or other #3Dprinter:

Here are a few alternative #plastics for your #...

hackaday.com 18 Sep '13, 6pm

ABS and PLA are the backbones of the 3D printing world. They’re both easy to obtain and are good enough for most applicati...

Extruded rail and 3D printed connectors form a proper laser engraver

Extruded rail and 3D printed connectors form a ...

hackaday.com 07 Sep '13, 4pm

Fast and accurate is a good description of this laser engraver built by [Ragnar] and [Gunnar]. The’re planning to show it ...

New post: Students build a 3D printed plane

New post: Students build a 3D printed plane

hackaday.com 13 Sep '13, 7pm

A student team has successfully designed, built, and flown a 3D printed RC plane using only $16 of plastic with a consumer...

#latest Surfing in 3D: Printed Boards Make Wave...

designnews.com 31 Aug '13, 4am

As a surfer myself, I know that creating a custom-made surfboard is both a precise and creative science, as well as a pain...

News: Uu 3D Studio brings 3D figurines to Scotts Square!:

News: Uu 3D Studio brings 3D figurines to Scott...

xinyun.sg 09 Sep '13, 7am

Carolyn Teo, co-founder of Kinetic Singapore says: “Kinetic is a local home grown creative agency that is internationally ...

3D Printering: Scanning 3D models

hackaday.com 24 Aug '13, 3pm

The Makerbot Digitizer was announced this week, giving anyone with $1400 the ability to scan small objects and print out a...