23 May '15, 11pm

3D Scanning Rig And DIY Turntable

3D Scanning Rig And DIY Turntable

It seems almost every day 3D scanning is becoming more and more accessible to the general DIYer. The hardware required is minimal and there are several scanning softwares and workflows to choose from. However, if you have slowly walked around a subject while holding a Kinect and trying to get a good scan, you know this is not an easy task. A quick internet search will result in several DIY scanning setup solutions that have been cobbled together and lack substantial documentation…. until now! [aldricnegrier] is fighting back and has designed and documented a rotary table that will spin at a constant speed while a subject is 3D scanned, making person scanning just that much easier. The project starts off with a plywood base with a Lazy Susan bearing assembly attached to the top. The Lazy Susan supports the rotating platform for the subject person to stand on, but it’s not j...

Full article: http://hackaday.com/2015/05/23/3d-scanning-rig-and-diy-tu...

Tweets

Spin DIY Photography Turntable System

Spin DIY Photography Turntable System

hackaday.com 24 May '15, 8am

A motorised turntable is very handy when taking product pictures, or creating animated GIF’s or walk around views. [Tiffan...

#Scanify #3DScanner

uk.rs-online.com 24 May '15, 2pm

Fuel 3D SCANIFY Handheld 3D Scanner SCANIFY® is the affordable, handheld 3D scanner that delivers fast, high-resolution sh...

NASA 3-D Printed Habitat Challenge

NASA 3-D Printed Habitat Challenge

planetsave.com 24 May '15, 11am

The ability to manufacture a habitat using indigenous materials, combined with material that would otherwise be waste from...

Celebrate DIY Victorian high-tech at the Steampunk World's Fair #diy #absorbed

Celebrate DIY Victorian high-tech at the Steamp...

edn.com 23 May '15, 7pm

It's time to dust off your goggles, charge up your ray gun and set your airship's course for the 2015 Steampunk World's Fa...

Software Leverages 3D Imaging Hardware

Software Leverages 3D Imaging Hardware

electronicdesign.com 22 May '15, 2pm

Microsoft’s Kinect brought 3D sensor technology to the masses, even though it was neither the first nor the only type of 3...

15 Ridiculous Easy DIY Repurposed Jewelry Storage Ideas

15 Ridiculous Easy DIY Repurposed Jewelry Stora...

ecosalon.com 23 May '15, 8am

Old Type Tray – If you come across an old printing type tray at a thrift or estate sale, repurpose into a jewelry storage ...

An Open Source, DIY Digitizer

An Open Source, DIY Digitizer

hackaday.com 19 May '15, 8am

When you look at the current methods of scanning 2D and 3D objects available today, you’re basically looking at an imaging...

3D Printering: Maker Faire And Resin Printers

3D Printering: Maker Faire And Resin Printers

hackaday.com 22 May '15, 8am

Of course Maker Faire was loaded up with 3D printers, but we’re no longer in the era of a 3D printer in every single booth...

Hackaday Prize Entry: A 3D Mapping Drone

hackaday.com 29 May '15, 5am

4k isn’t actually mpressive for a mapping application. 4K is far lower resolution then what can be flown in the mirrorless...