31 Mar '17, 6pm

Nice breakdown of the @Lutron Caseta #homekit #iot #homeautomation

Nice breakdown of the @Lutron Caseta #homekit #iot #homeautomation

Open the Caseta Wireless Bridge by removing the four M2x10mm self-threading screws at the bottom of the unit hidden underneath the four gray stick-on feet with a Torx T8 standard driver. Remove the internal M2x10mm self-threading screw and desolder W1 while pulling up on the board. The internal transparent plastic circuit board holder is attached to the top white plastic box by four melted connections. If you wish to remove the plastic circuit board holder, do so with flush-cutters after you remove the circuit board.

Full article: https://www.allaboutcircuits.com/news/teardown-tuesday-lu...

Tweets